A wide range of saber toys have been distributed all over the world since the 1970's. Domms Lightsabers sells high quality, combat ready sabers which can be used for display, training or to play our epic battles and duelling. Our goal is simple - to make the dreams of fans a reality everywhere. Our innovative products come with market leading features, and we are sure you will enjoy the range available.
Below you will find out more detailed information about the saber we have listed. As well as some useful tips and advice. The fight for the fate of the galaxy awaits you.Will you fight for freedom or domination? May the force be with you! The c36 is a fantastic saber from our core range and is currently. In Black or Grey with more colours to come. The hilt weighs in at a 240g and comes with our RGB Eco Smoothswing as standard.
The emitter (top of saber) cuts away in the middle to expose the blade which has a striking affect when fully assembled and in use. The main core body has the USB charging point just above the control button which gives it a slick look. The LED light around the control button is used to. The different features (see instructions below).
The pommel (bottom of saber) has the sound holes as the speaker is housed towards the bottom of the main body. The c36 is an amazing saber and comes in a. The light is an LED 12w RGB (red, green and blue) which means you get to choose the colour that you want, whenever you want as the blade cycles through. It comes with a safety protected 3000mAh battery, battery backwards protect system, overload system and over discharge system. The speaker is 2-3watts, 4/8 ohm which gives a fantastic quality.
Features include Pre power on, Blaster, Lock up, Flash on clash, 9 sets of sound fonts, Volume adjustment, Light effective adjustment, Music and smooth swing. Blade size is 92cm long, 2mm thick and 1 OD removable bullet tip.Sound fonts are Darth Sidious, Leia, Kylo Ren, Mandalorian Darksaber, General Kenobi, Cal Kestis, Darth Vader, Count Dooku and Rey Skywalker. Press and hold the LED button to bring out of sleep mode. You will hear a "power on" voice and the LED button will turn on. Press and hold the button once, quickly, to turn the blade on. The following controls activate when the blade is on and are based on the flash of the LED button light. A quick press will initiate a single blaster deflect effect. Press and hold the button for one flash, then release. This will initiate the lockup effect. A quick press will end the lockup effect.
Press and hold the button for two flashes, then release. This will initiate the colour cycle.
When the colour you want shows, a quick press will end the cycle. Press and hold the button for 3 flashes to enter the quick colour select. When a colour you like appears, press the button once to exit.Press and hold past three flashes to shut off the blade. While the blade is off, the following controls are activated based on the flash of the LED button light.
This will change the volume. There are 3 settings: Volume high, Volume low and mute. This will change the blade effect. There are 3 blade effects: Steady, Pulse and Unstable.
Press and hold the button for three flashes, then release. This will change the sound font to the next selection.Press and continue to hold past the third flash for approximately 10 seconds to put the saber back into sleep mode. It is important that you do not let the battery fully discharge so our advice is to fully charge the saber when it says low battery or if you haven't used it in a while. What to do when you first get your new saber.
When you get your new saber, please make sure you put it on charge straight away. While it is on charge have a read of the instructions. It's going to take a few tries to get use to all the features via the control button but when you do it is easy. We are available for help and support if you are having any issues learning how to use the features.We will send it with the most appropriate courier. We will send the saber within 12 hours of ordering. We hope there are no delays in you receiving your order however we will upload tracking so that you can keep an eye on it. If you have caused some accidental damage, we will still be able to help i. You have snapped the blade we can replace at a discounted price.
This product is not suitable for children under the age of 13 unless supervised by an adult to prevent injuries, remember this is not a toy. Lightsaber so taking the time to learn how to handle and use the features properly is advised. Fully charge the saber before operating. Use only the included cable with 5v1a USB or 5v Wall charger. Failure to follow this instruction can result in damaged electronics.A Range Of Colours To Choose From. A Heavy duelling aluminium alloy hilt with a high quality blade. For True Fans Who Appreciate A Quality Saber.
We are lightsaber fanatics and love that we get to sell some awesome sabers. We started as an emporium and are transitioning into a lightsaber specialist. Every month we are expanding our range to ensure we have a variety of lightsabers available for quick dispatch from the UK rather than waiting weeks from overseas. Thanks for stopping by and supporting us on our journey. We deliver to any address in the UK, as well as internationally.
It is in original undamaged packaging with all tags intact. The product is in the same condition as how you received it. You have a statutory duty to take reasonable care of our goods whilst they are in your possession and during transit.
His communication is great and he has a good understanding of the buyers perspective when purchasing something so expensive. He is also a really nice guy that makes sure the quality of his products are sublime. The lightsaber is bright, easy to use and strong. This item is in the category "Collectables\Science Fiction Collectables\Star Wars Collectables\Lightsaber & Weapon Replicas". The seller is "domms_emporium" and is located in this country: GB.
This item can be shipped to United Kingdom.