The Light Claymore is used with a European style of fighting, as the cross guard must be taken into account when wielding. The belt connector is a chromed steel D-ring, which is the most secure way to keep your saber on your belt. The blade set-screw is hand cut, and is capped with a knurled brass knob, which will allow you to tighten down the blade in the socket by hand, for light use. To secure the blade for hard use or dueling, you just need to use a pair of pliers (not included) to add a half turn onto the blade, which will keep the blade in place if you plan on really putting the saber through its paces.The saber uses three standard AAA batteries (not included), with easy access to the battery pack through the threaded pommel. The steel blade socket is approximately three inches deep. This saber has No weathering on it. The LED is a High Intensity Luxeon Rebel Star that is housed deep inside the steel hilt to protect it from shock and wear. The LED color is Fire Red.
The Fire Red is a bright red with some orange highlights. My blades are nearly indestructible, thick-walled, industrial grade polycarbonate. It is the highest quality polycarbonate available. The tips are specifically design and made to not break or fly off during hard use (many competitors blade tips will break off from the shock of clashing the blade, so beware of cheap imitations).
The reflective film I use is a high quality plastic that both reflects the light internally and diffuses the light into a soft colored glow. The blade tips are staked in place and are made to handle the shock of full contact, martial arts level fighting.
The outer diameter of the blade is 1 and the overall length of the blade shaft is 32 inches. It will stick out of the hilts emitter at around 29 inches in length. The length of the blade is made to give the saber perfect balance and allow the user great freedom of movement and control when using the saber. LED Combat saber with Combat Blade. 1"x32L thick-walled polycarbonate, 29" out of the emitter.
ALW sabers are the most durable hilts and blades on the market. I have been making custom sabers since 2003 (Im one of the first people to ever produce functional light up sabers), and my work is known for its durability, balance, ergonomics, and artistic beauty. The pictures dont do these sabers justice. They are truly functional fine art that will last you a life time of enjoyment.
My saber designs are made to look great in a collection, feel great in the hands, and function exceptionally well on stage or anywhere you decide to use them. Theyre perfect for film making projects, conventions, cosplay events, or within your art and prop collection. Each piece is made one at a time, by hand, and tested repeatedly for proper balance, feel, and looks.The item "Custom LED Lightsaber Light Saber Prop Light-Claymore" is in sale since Saturday, February 9, 2019. This item is in the category "Collectibles\Science Fiction & Horror\Star Wars Collectibles\Lightsaber & Weapon Replicas". The seller is "riartist" and is located in Monroe, New York. This item can be shipped worldwide.