· Hilt Detailing - 35mm wide detailing riveted on with rubber wrap. · LED - Running a Cree XP-E2. · Hilt LED - Running a high powered, pre-coloured Cree XP-E2 LED.
· Activation Button - Resting independent self-latching switch. Running 1 x Li-Ion rechargeable battery in the base of hilt.(we recommend no longer than a 4 hour charge). · Battery Life - Approximately 4 hours of use. · Speaker Housing a 2 watt speaker. Each saber has fully configurable light, sound, and motion sensitivity settings. Choose from two different sound fonts.
Button controlled Voice prompted menu for font selection and settings. Boot up & menu settings. Choose from 1 of 8 Clash sensitivity settings.Choose from 1 of 8 swing sensitivity settings. Viridian also has Blaster Deflect effect when pressing the button.
Crimson also has Blade Lockup effect when pressing the button. · Blade material - 2mm thick polycarbonate. · Blade Tip - Clear slightly frosted pitted tip glued in place. · Blade Length - 32 Inches long.
· Blade Base - Clear base cap glued in place. · Blade Width - 24mm outer diameter. · Removable Blade - Untighten locking nut in rear of handle (Dont over tighten).· Charging - Saber comes with USB charging cable. 5V charge with safety cut off. · Full Weight - Approximately 420 Grams. · LED - Not 100% visible in direct sunlight.
· Blade - Not rated for extreme or aggressive combat. All ForceSabers are bespoke custom handmade to order. As this Saber is handmade there are unavoidably slight cosmetic scratches or imperfections on the handle or blade, also the raw materials may also come with imperfections or marks. When being used the imperfections will have no effect on the look or use of the item. Every saber uses a pre-coloured bespoke high powered LED which gives the blade the required colour.
For best results use in low light (dusk) conditions. Direct sunlight or bright day light will inhibit visibility of the saber. All Blades have a 2mm wall so we recommend light sparing or light duelling. We advise against extreme combat or duelling. Do not leave blade exposed to direct sunlight for prolonged periods of time as this will alter the translucent glue in the blade tip.
When replacing blade DO NOT overtighten the Micro Screw. If over tightened, this could lead to damage of the thread.
Please note: - When purchasing this listing you are confirming you have read and seen all the information provided. The item "40 STAR WARS LIGHTSABER ULTIMATE MASTER FX LUKE LIGHT SABER DS ROTJ + SOUND" is in sale since Friday, March 22, 2019.
This item is in the category "Collectables\Science Fiction Collectables\Star Wars Collectables\Other Star Wars Collectables".sabers" and is located in Wakefield. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Brazil, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.